等离子体浸没式离子注入-离子束增强沉积TiN膜研究

本文采用一种新型的等离子体浸没式离子注入 离子束增强沉积的技术(PIII IBAD),在Cr12MoV钢基体上制备出了TiN膜,对沉积膜的组织进行了光电子能谱分析,并对沉积膜进行了硬度检测、摩擦试验及磨痕形貌分析。试验结果表明,沉积膜中的组织为TiN、TiO2和Ti2O3,TiN膜具有高达Hv3200的高硬度和极其优良的摩擦性能。     

大庆蜡油在酸性催化剂上反应机理的研究

以大庆蜡油为原料，采用两种不同类型的催化剂，在流化床反应器实验装鬣上进行催化裂化反应。结果表明，大庆蜡油在酸性催化剂上反应所产生的干气组成与高烯烃催化裂化汽油相同，干气的产生主要是单分子裂化反应所造成的。从干气产率、组成以及液化气组成可以看出，大庆蜡油在不同类型的催化剂上明显地表现出裂化反应类型的差异。     

Preparation and adsorption behavior of a cellulose‐based,mixed‐mode adsorbent with a benzylamine ligand for expanded bed applications

A novel mixed‐mode expanded bed adsorbent with anion‐exchange properties was explored with benzylamine as the functional ligand. The cellulose composite matrix, densified with stainless steel powder, was prepared with the method of water‐in‐oil suspension thermal regeneration. High activation levels of the cellulose matrix were obtained with allyl bromide because of the relative inertness of the allyl group under the conditions of the activation reaction. After the formation of the bromohydrin with N‐bromosuccinimide and coupling with benzylamine, the activated matrix was derived to function as a mixed‐mode adsorbent containing both hydrophobic and ionic groups. The protein adsorption capacity was investigated with bovine serum albumin as a model protein. The results indicated that the prepared adsorbent could bind bovine serum albumin with a high adsorption capacity, and it showed salt tolerance. Effective desorption was achieved by a pH adjustment across the isoelectric point of the protein. The interactions between the cell and adsorbent were studied, and the bioadhesion was shielded by the adjustment of the salt concentration above 0.1M. Stable fluidization in the expanded bed was obtained even in a 2% (dry weight) yeast suspension. The direct capture of target proteins from a biomass‐containing feedstock without extra dilution steps could be expected with the mixed‐mode adsorbent prepared in this work, and this would be especially appropriate for expanded bed adsorption applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

电液控制器在汽轮机控制系统中的应用

介绍了WOODWARD505电液控制器原理、功能及在包钢热电厂汽轮鼓风机控制系统的成功应用，大大改善了汽轮机的调节控制品质。     

Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

Transport properties in a mixed inorganic ion exchanger—zirconium phosphomolybdate—in comparison to its single salt counterparts

Amorphous inorganic ion exchangers zirconium phosphate, zirconium molybdate and zirconium phosphomolybdate have been prepared and characterized by elemental analysis, TGA, FTIR and surface area measurements. The protonic conductivity in these materials were determined at various temperatures and compared. It was found that the mixed material zirconium phosphomolybdate showed maximum conductivity at all temperatures.     

Tuning of electronic states in self-assembled InAs quantum dots using an ion implantation technique

We report the tunability of up to 150 meV of the ground state transition of self-assembled InAs quantum dots (QDs) using Mn ion implantation and subsequent annealing. Because of the exciton localization in the quantum dots, the photoluminescence efficiency (T=12K) of the quantum dot transition remains at 80% of its original value after implantation with a Mn dose of 1×10¹³ cm⁻²ions. Strong luminescence still remains at room temperature. At a high implantation dose (1×10¹⁵ cm⁻²) and rapid thermal annealing (700°C for 60s) about 25% of the QD luminescence intensity is recovered at T=12K.     

丙烯酸接枝聚丙烯纤维的结构与性能

本文研究了用化学引发剂引发丙烯酸接枝聚丙烯纤维的某些影响因素。红外光谱分析表明，丙烯酸接枝在聚丙烯大分子链的叔碳原子上。Ｘ－射线衍射和ＤＳＣ分析指出，纤维接枝后结晶度有所增加，接枝前纤维存在的β－变体转化成了α－变体，接枝纤维的吸湿性、离子交换容量和染色性随接枝率增加而增大。接枝纤维的力学性能有所下降。     

The multi-structure of oxidized-reduced tungsten carbide surface(s)

The XPS of bulk tungsten carbide, partially oxidized WC surfaces at 373 and 573 K as well as tungsten trioxide have been reported. Bulk WC has been prepared from WO₃ as a starting material in a mixture of CH₄ (20%) and H₂ (80%) at 1150 K for 4 h, while partially oxidized WC surfaces were prepared by oxygen chemisorption on a clean WC surface at 200 K, then the temperatures were raised to 373 and 573 K respectively. The XPS of a freshly prepared WC reveals the presence of a small amount of WO₃ on the surface and a slightly higher concentration in the bulk. The oxygen-exposed fresh WC surfaces and surfaces treated at temperatures higher than 373 K show the presence of WO₃ in a considerable quantity depending on the length and the treatment temperature. Ar⁺ bombardment of this partially oxidized surface reduces WO₃ to WO₂ and W(0), while WC is partially reduced to W(0). Isomerization reactions of alkanes on oxygen-exposed WC surface occurs in reality on a composite surface structure containing WC, WO₃, WO₂ and elemental W(0).